Amtico Marine Technical Specification Date of issue: 7th May 2014 AREAS OF USE Marine installations. INSTALLATION Installation must be carried out in accordance with the requirements of the relevant national standard and the Amtico Products Technical Manual – the latest information is available at www.amtico.com. The surface must be flat, smooth, dry and fit for purpose. Levelling compounds should be used as recommended. Tiles and subfloor must be allowed to stabilize to a constant temperature between 18° and 27°C for a period of 24 hours prior to, during and 24 hours after installation. Underfloor heating must be switched off for 48 hours before, during and 48 hours after installation. The tiles should be stored flat. Only Marine certified adhesives can be used - Amtico SF Plus, HT Extra, PS or Universal 2-Part Adhesives are recommended for installing tiles. The completed installation should be rolled with a 45 kg roller before the adhesive hardens. MAINTENANCE Maintenance should be carried out in accordance with the recommendations of the Amtico Products Technical Manual – the latest information is available at www.amtico.com. Cleaning products and entrance matting designed for use with Amtico products are available from Amtico International. Maintenance should involve simple dust mopping, wet mopping, spray cleaning or scrubber-drying with a neutral detergent. The application of a floor dressing is not necessary, although this can be carried out to provide additional protection if desired. Page 2 of 2
Download PDF file
Build your own flipbook