Amtico First Technical Specification Date of issue: 26th February 2015 AREAS OF USE Light commercial, social housing and residential. INSTALLATION Installation must be carried out in accordance with the requirements of the relevant national standard and the Amtico Technical Manual – the latest information is available at www.amtico.com. The surface must be flat, smooth, dry and fit for purpose. Levelling compounds should be used as recommended. Tiles and subfloor must be allowed to stabilize to a constant temperature between 18° and 27°C for a period of 24 hours prior to, during and 24 hours after installation. Underfloor heating must be switched off for 48 hours before, during and 48 hours after installation. The tiles should be stored flat. Amtico adhesives are recommended for installing tiles. The completed installation should be rolled with a 45 kg roller before the adhesive hardens. MAINTENANCE Maintenance should be carried out in accordance with the recommendations of the Amtico Technical Manual – the latest information is available at www.amtico.com. The urethane surface treatment facilitates the removal of scuff marks. Cleaning products and entrance matting designed for use with Amtico products are available from Amtico International. Maintenance should involve simple dust mopping, wet mopping, spray cleaning or scrubberdrying with a neutral detergent. The application of a floor dressing is not necessary, although this can be carried out to provide additional protection if desired. Page 2 of 2
Download PDF file
Build your own flipbook